Editing a static product group – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 219
152
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Product group overview
5
6. Add products to the group by selecting the product in the Available Products list and clicking
the right arrow button.
NOTE
You can add a standalone VDX product or a VCS fabric to a user-defined Product Group;
however, the VCS fabric members are not included with the group.
The selected products move from the Available Products list to the Selected Products list.
7. Remove products from the group by selecting the product in the Selected Products list and
clicking the left arrow button.
The selected products move from the Selected Products list to the Available Products list.
8. Click OK.
The new group displays in the User-Defined Groups folder of the Product list.
Editing a static product group
To create a product group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the product group you want to edit in the Product List and select Edit Group.
The Edit Product Group dialog box displays.
3. Edit the name for the product group in the Name field.
4. Edit the description for the product group in the Description field.
5. Select the Topology Display Enable check box to display the product group in the L2 Topology
view.
6. Add products to the group by selecting the product in the Available Products list and clicking
the right arrow button.
NOTE
You can add a standalone VDX product or a VCS fabric to a user-defined Product Group;
however, the VCS fabric members are not included with the group.
The selected products move from the Available Products list to the Selected Products list.
7. Remove products from the group by selecting the product in the Selected Products list and
clicking the left arrow button.
The selected products move from the Selected Products list to the Available Products list.
8. Click OK.