Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1142)

Brocade Network Advisor SAN + IP User Manual 1089
53-1002949-01
Zoning administration
26
Clearing the fabric zone database
ATTENTION
Clearing the zone database removes all zoning configuration information, including all aliases,
zones, and zone configurations, in the fabric.
Clearing the fabric zone database is disruptive to the fabric.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
databases for the selected entity.
3. Select the Fabric Zone DB from the Zone DB list.
4. Select Clear All from the Zone DB Operation list.
5. Click Yes on the confirmation message.
The message closes and the Fabric Zone DB is cleared of all zoning configurations.
6. Click OK to close the Zoning dialog box.
Removing all user names from a zone database
Use this procedure to remove all user names from the selected offline zone database.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
databases for the selected entity.
3. Select a zone database that you have checked out (your user name is in the Current User
column) in the Zone DB list.
4. Select Undo CheckOut from the Zone DB Operation list.
5. Click Yes in the confirmation message.
This removes the user names of users currently logged in to the client from the Current User
column for this zone database.
6. Click OK to save your work and close the Zoning dialog box.
Any zones or zone configurations you have changed are saved in the zone database.