Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1396)

Brocade Network Advisor SAN + IP User Manual 1347
53-1002949-01
VLL manager
37
Viewing VLL instances
To view currently defined VLL instances, do the following:
1. Select Configure > MPLS > VLL.
2. Select the VLL Manager Views tab ( Figure 586 ).
FIGURE 586 VLL Manager Views tab
3. You can filter output by name or by VCID by using the selector next to the VLL field.
- You can use an Asterisk (*), as a wildcard character if you select By Name.
- You can enter individual VCIDs or a range of VCIDs if you select By VCID.
NOTE
If you choose By VCID you can search only for remote VLLs (VLLs whose endpoints are on two
different products), but not for local VLLs (VLLs whose endpoints are on the same product).
4. Enter a product name or click the Select button to launch the Select Products dialog box to
select a product.
5. Select Type to filter VLLs by type. The choices are All (all VLLS matching the name or VCID
criteria), Local-VLL, and Remote VLL.