Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1483)

Brocade Network Advisor SAN + IP User Manual 1435
53-1002949-01
Creating key passwords
40
Creating key passwords
You can create candidate key passwords used when importing SSL keys from a ServerIron product
using the following procedure.
1. Select Configure > Application Delivery > SSL Certificates.
The SSL Certificates dialog box displays.
2. From the Certificate View tab, click Key Passwords.
The Key Passwords dialog box displays ( Figure 630 ).
FIGURE 630 Key Passwords dialog box
3. Under Add/Edit Key Password, enter an ASCII character string (from 1 through 16 characters)
in the Display Label field that identifies the password you enter in the Password field. Use the
key name or a character string that is easy to identify with a specific key.
The label provides a means for identifying the password. The password itself is not exposed.
4. Enter a password (4 through 254 ASCII characters) for the SSL encryption key in the Password
field.
5. Use the right arrow key to move the password to the Key Password List.
You can use the left arrow key to move a key back to Add/Edit Key Password to edit the Display
Label and Password fields. Use the Up and Down buttons to rearrange the Key Password List.
6. Click OK to save your work.