Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1200)

1148 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Fabric Binding overview
28
FIGURE 488 Fabric Binding dialog box
2. Review the fabric binding membership details.
• Fabric List table — Lists the fabrics in your network.

Fabric Name — The name of the fabric.

Fabric WWN — The world wide name of the fabric.

Binding Status — The binding status (enabled/disabled) of the fabric.

Enable/Disable check box — Indicates whether fabric binding is enabled. Select to
enable a fabric binding for the fabric. For step-by-step instructions, refer to
“Enabling
fabric binding” on page 1149 and “Disabling fabric binding” on page 1150.

Action — Displays any actions on the fabric.
• Available Switches table — Lists the switches available to add to the fabric binding
membership list. For step-by-step instructions, refer to
“Adding switches to the fabric
binding membership list” on page 1151.

Name — The name of the switch fabric.

Node WWN — The node WWN of an available or member switch.

Domain ID — The domain ID of an available or member switch.
NOTE
You can copy (Ctrl+C) and paste (Ctrl+V) the node WWN into the Node WWN field. It does
not matter if the copy source contains colons (11:22:33:44:55:66:77), only the numbers
are pasted (11223344556677) in the Node WWN field.

Fabric Name — The name of the fabric.

Fabric WWN — The world wide name of the fabric.