Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual

Page 754

Advertising
background image

Brocade Network Advisor SAN + IP User Manual

697

53-1002949-01

QoS configuration

20

3. Click the QoS tab on the Edit Switch dialog box.

The QoS dialog box displays.

4. Select one or more DCB maps.

5. Click the left arrow button.

The selected DCB map row is removed from the list.

6. When you have finished the configuration, click OK to launch the Deploy to Products dialog

box.

NOTE

With Fabric OS version 7.0 and later, there is only one DCB map (default), that you cannot
delete.

7. Click OK after changing the attributes of the current deployment.

The Deployment Status dialog box displays.

8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.

9. Click Close to close the Deployment Status dialog box.

Assigning a DCB map to a port or link aggregation group

The Edit Port dialog box - QoS tab allows you to assign DCB maps to ports and LAGs on a selected
switch.

NOTE

QoS maps are created using the Edit Switch dialog box, accessible from the DCB Configuration
dialog box.

A port can have either a DCB map or a Traffic Class map assigned to it, but it cannot have both.

1. Select Configure > DCB.

The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.

2. Select a port or LAG, and click Edit.

3. Click the QoS tab on the Edit Port or Edit LAG dialog box.

The QoS dialog box displays.

4. Click the Assign a map to <device_name> check box to assign the selected port to a DCB map.

If you do not select this check box, all QoS edit features are disabled.

5. Select DCB Map in the Map Type list.

6. Select a DCB map in the Available DCB Maps list.

If no DCB maps were created on the switch, the Available DCB Maps list is empty. Otherwise,
the following DCB map details display:

PG - ID — Lists the priority group ID (15.0 through 15.7 and 0 through 7).

% Bandwidth — Lists the bandwidth value for priority group IDs 0-7. The total of all priority
groups must equal 100 percent.

Advertising