Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1456)

1408 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
GSLB policy management
39
Importing IP addresses from a file
1. Select Configure > Application Delivery > GSLB.
2. Click the Policy Configuration tab.
3. In the Geo Prefix/Static Prefix list, click Import.
The List of Prefix Networks and Location dialog box displays.
4. Click Import on the Prefix tab of the Policy Configuration dialog box.
The List of Prefix Networks and Locations dialog box, shown in Figure 616 , displays.
5. Enter a list of prefix networks and locations in the text box. Each entry should be on a separate
line, and separate the prefix network and location with a comma. The location must be one of
the following:
• Asia
• Europe
• North America
• South America
• None
If the location is None, it is added as a static prefix.
6. Select one of the following options:
• Overwrite: Deletes and replaces any prefix in the list.
• Append: Adds to the prefixes in the list.
FIGURE 616 List of Prefix Networks and Location dialog box
7. Click OK to continue.