Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 317)

252 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Areas of responsibility
7
Editing an AOR
NOTE
You cannot edit system AORs.
To make changes to an existing AOR, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Select the AOR you want to edit in the AOR table and click Edit.
The Edit AOR dialog box displays.
3. Complete step 3 through step 5 in “Creating an AOR” on page 251.
4. Click OK to save the AOR and close the Edit AOR dialog box.
If you make changes to the user’s role or AOR while the user is logged in, a confirmation
message displays. When you click Yes on the confirmation message, the user is logged out and
must log back in to see the changes.
5. Click Close to close the Users dialog box.
Copying an AOR
NOTE
You cannot duplicate system AORs.
To create a new AOR by copying an existing one, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Select the AOR you want to copy in the AOR table and click Duplicate.
The Duplicate AOR dialog box displays.
3. Complete step 3 through step 5 in “Creating an AOR” on page 251.
4. Click OK to save the new AOR and close the Duplicate AOR dialog box.
The new AOR displays in the AOR table of the Users dialog box. To add this AOR to a user, follow
the instructions in
“Assigning roles and areas of responsibility to a user account” on page 244.
5. Click Close to close the Users dialog box