Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1674)

1630 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Data monitoring
46
Data monitoring
Power Center enables you to view PoE data for ports and products in both table and chart formats.
Viewing PoE data for products
To view PoE data for a product, complete the following steps.
1. Select Monitor > Power Center.
The Power Center dialog box displays.
2. Select PoE Products from the View list.
FIGURE 706 Power Center dialog box
3. Review the details in the PoE Products list:
• Group/Product — Lists of the discovered PoE Products, Product Groups, and Ports.
• Status — The threshold status icon for the product.
• Last Refresh — The time of the last data refresh on the product.
• PoE Ports — The number of PoE-capable ports on the product.
• Enabled Ports — The number of PoE-enabled ports on the product.
• Conn. Ports — The number of PoE ports connected to a powered device.
• Capacity (W) — The total PoE capacity of the product in Watts.
• Allocation (W) — The amount ofpower allocated bythe productto the connected devices in
Watts. Only displays when the product running agent version 7.2.2 or later. If the product is
running a agent version 7.2.1 or earlier, “-“ displays.