Wireless devices, Wireless device discovery – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual

Page 665

Advertising
background image

606

Brocade Network Advisor SAN + IP User Manual

53-1002949-01

Wireless devices

17

Wireless devices

The Management application supports three models of wireless controllers.

The Management application supports four models of wireless access points.

1

The Management application cannot discover or manage wireless access points running Mobility 5.1.

Wireless device discovery

The Management application enables you to discover individual wireless devices or multiple
wireless devices using a discovery profile.

NOTE

Wireless access points in adaptive mode cannot be discovered by the Management application.

Instructions for discovering IP devices are detailed in

Chapter 4, “Discovery”

and include

information about the following:

“Configuring a discovery profile”

on page 101

“Adding an IP device to discovery”

on page 121

After discovery, the Management application inspects the SNMP trap recipient and syslog recipient
registration on wireless controllers. If there is an error with the registration, a Master Log event
displays as a Warning event. The Warning event provides the reason for the error to enable you to
fix the problem.

TABLE 75

Wireless controller models

Device Name

Firmware required

RFS 4000

Mobility 5.3 or later

RFS 6000

Mobility 5.3 or later

RFS 7000

Mobility 5.3 or later

TABLE 76

Wireless access points

Device Name

Firmware required

AP 650

Mobility 4.1.1 (standalone mode)
Mobility 5.1

1

(adaptive mode)

AP 7131

Mobility 4.1.1 (standalone mode)
Mobility 5.1

1

(adaptive mode)

AP 7131N

Mobility 4.1.1 (standalone mode)
Mobility 5.1

1

(adaptive mode)

AP 5181

Mobility 2.5.X (standalone mode)
Mobility 5.1

1

(adaptive mode)

AP 6511

Mobility 4.1.1 (standalone mode)
Mobility 5.1

1

(adaptive mode)

Advertising