Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1392)

Brocade Network Advisor SAN + IP User Manual 1343
53-1002949-01
LSP
37
Deleting a saved LSP configuration
You can delete a saved LSP configuration by taking the following steps.
1. Select Configure > MPLS > LSP.
2. Select the Saved Configuration tab.
3. Select the saved configuration
4. Click the Delete button.
Displaying LSP Topologies
Refer to the View Management chapter for descriptions for topology map layout options and
navigation aids.
You can display topology maps for configured LDP and RSVP LSPs by taking the following steps.
1. Select Monitor > MPLS > LSP Topology.
The LSP Topology View displays ( Figure 582 ).
FIGURE 582 LSP Topology View
2. You can select any of several options to gather information.
- The tree structure has folders for RSVP LSPs, LDP LSPs, and products without LSP
configurations. Selecting an RSVP LSP in the tree highlights the corresponding LSP in the
topology view.
- Hovering over a link on the topology view shows the LSP name as a tooltip.
- Double-clicking the product shows all LSPs originating from the product.
3. If you would like to filter the display, use the Options selector in the tool bar to launch the LSP
Topology View Options dialog box ( Figure 584 ).