Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2024)

1984 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
IP device properties
E
Flow Control The Ethernet priority flow control mode of the port. Possible modes are
as follows:
•
Off (the default)
•
802.3x pause
•
Tx On or Off
•
Rx On or Off
•
Priority Flow Control. For this mode, the Tx and Rx values for each
CoS display in the table.
Maps Displays details about the following DCB maps:
•
CoS to CoS — Displays the details of the CoS to CoS map assigned
to the port.
•
Traffic Class — Displays the details of the Traffic Class map
assigned to the port.
NOTE: The CoS to CoS map is the default.
QoS tab — Non-DCB mode (Ethernet Pause and Ethernet PFC)
Mode The mode of Quality of Service (QoS) assigned to the port (non-DCB).
Flow Control The Ethernet priority flow control mode of the port. The default flow
control mode is Off. Possible modes are as follows:
•
Off
•
802.3x pause
•
Tx On or Off
•
Rx On or Off
•
Priority Flow Control. For this mode, the Tx and Rx values for each
CoS display in the table.
Maps Displays details about the following DCB maps:
•
CoS to CoS — Displays the details of the CoS to CoS map (the
default) assigned to the port.
•
Traffic Class — Displays the details of the Traffic Class map
assigned to the port.
L2 ACLs tab
Name The name of the Access Control List (ACL).
Type The ACL type. Options include Extended and Standard.
L2 ACLs list The list includes the following details:
•
Sequence — The Layer 2 ACL entry sequence number.
•
Action — Whether the ACL permits or denies traffic.
•
Source — The source MAC address on which the ACL filters traffic.
•
Count — Whether count is enabled or disabled.
Ports tab Select to display information about ports on the fabric.
Show list Select what ports you want to display. Options include:
•
Fabric and Edge Ports
•
Edge Ports
•
Fabric Ports
•
FC Ports
Port Count The number of ports in the group.
Field/Component Description