Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 572)

510 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
SMI Agent Configuration Tool
13
FIGURE 191 SMIA Configuration Tool dialog box
Launching the SMIA configuration tool on Unix
NOTE
All Management application services must be running before you can log into the SMIA
Configuration Tool. To start the Management application services, click Start on the Server
Management Console dialog box.
Perform the following steps to launch the Server Management Console on Unix systems.
1. On the Management application server, go to the following directory:
Install_Directory/bin
2. Type the following at the command line:
./smc
OR
sh smc
3. Click Configure SMI Agent on the Server Management Console dialog box.
The Login dialog box displays.
4. Enter your username and password in the appropriate fields and click OK.
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your username and password do not change.
The SMIA Configuration Tool dialog box displays.