Top port crc errors monitor – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 374
Brocade Network Advisor SAN + IP User Manual
309
53-1002949-01
Performance monitors
8
•
C3 Discards RX TO — The number (error count) of Class 3 frames received at this port and
discarded at the transmission port due to timeout errors for the duration specified in the
monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
•
Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor”
Accessing additional data from the Top Port C3 Discards RX TO monitor
•
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
•
In a Top N or Bottom N C3 Discards TX TO and C3 Discards RX TO monitors, right-click an
FC-port row and select Discarded Frames to navigate to the Discarded Frames dialog box. For
more information, refer to
“Viewing discarded frames from a port”
•
Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to
Top Port CRC Errors monitor
The Top Port CRC Errors monitor (
) displays the top ports with frames that contain cyclic
redundancy check (CRC) errors in a table.
FIGURE 114
Top Port CRC Errors monitor