Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1834)

Brocade Network Advisor SAN + IP User Manual 1793
53-1002949-01
MAPS category, object, and measure hierarchy
50
Security
Health Local Switch
•
SEC_DCC — Device connection control violations
•
SEC_HTTP — HTTP violations
•
SEC_CMD — Illegal command
•
SEC_IDB — Incompatible security DB
•
SEC_LV — Login violations
•
SEC_CERT — Invalid certifications
•
SEC_FCS — No Fabric Configuration Server (FCS) switch
•
SEC_SCC — Switch Connection Control violations
•
SEC_AUTH_FAIL: — Authentication failures
•
SEC_TELNET — Telnet violations
•
SEC_TS — Time server out of synchronization
•
RAS Log Event
•
SNMP Trap
•
E-mail
Switch
Resources Temperature sensor
•
TEMP — Temperature
•
RAS Log Event
•
SNMP Trap
•
E-mail
Local Chassis
•
FLASH_USAGE 2 — Flash usage
•
CPU — CPU usage
•
MEMORY_USAGE — Memory usage
•
RAS Log Event
•
SNMP Trap
•
E-mail
FCIP Circuit
•
CIR_STATE — FCIP circuit state changes
•
CIR_UTIL — FCIP circuit utilization
•
CIR_PKTLOSS — FCIP packet loss
•
RAS Log Event
•
Fence (CIR_STATE)
•
SNMP Trap
•
E-mail
Traffic /
Flows
Performance FC Port
•
RX — Receive bandwidth usage percentage
•
TX — Transmit bandwidth usage percentage
•
UTIL — Trunk utilization
•
RAS Log Event
•
SNMP Trap
•
E-mail
Flow
•
TX_FCNT — Tx Frame Count
•
RX_FCNT — Rx Frame Count
•
TX_THPUT — Tx Throughput
•
CRED_ZERO — Time Tx credit zero
•
RX_THPUT — Rx Throughput
•
IO_RD — IO Read Command Count
•
IO_WR — IO Write Command Count
•
IO_RD_BYTES — IO Read Data
•
IO_WR_BYTES — IO Write Data
1. Only valid for 16 Gbps, 10 Gbps, and QSFP transceivers.
2. For FLASH_USAGE, you can configure RAS Log Event, Fence, SNMP Trap, E-mail, Switch Status Critical, or Switch Status Marginal.
TABLE 173 Monitors and actions by category (Continued)
Category Objects Measures Possible actions