Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 709)

Brocade Network Advisor SAN + IP User Manual 651
53-1002949-01
Adapter software
19
4. Select the host’s corresponding driver to update from the Driver to Update list. Once the driver
has been selected for each host, click Update .
Alternatively, you can select one or more hosts from the Selected Hosts list and click Select
Latest to automatically select the latest operating system-specific driver for each selected host.
If you want to import a driver from another location, follow the instructions in
“Driver
repository” on page 651.
Driver repository
You can access the Driver Repository dialog box from the Adapter Software dialog box. Initially, the
repository is empty. You must import files into the repository. Imported driver files are then
displayed in the Available Driver Files list in the Driver Repository dialog box.
Importing a driver into the repository
To import drivers into the Management application, perform the following tasks.
1. From the Adapter Software dialog box, click the Repository button.
The Driver Repository dialog box, shown in Figure 230 , displays.
FIGURE 230 Driver Repository dialog box
2. Click Import on the Driver Repository dialog box.
The Import Driver Repository dialog box displays.
3. Locate the driver file using one of the following methods:
• Search for the file you want from the Look In list.
• Enter the name of the image file you want to import in the File Name field.
4. Click Open.
After the import completes, you see a message that the driver imported successfully.
5. Click OK.