Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2031)

Brocade Network Advisor SAN + IP User Manual 1991
53-1002949-01
Properties customization
E
Adding a property field
You can add up to three new user-defined properties to the fabric Properties dialog box as well as
the Properties and Ports tabs of the device Properties dialog box.
To add a user-defined property, complete the following steps.
1. Right-click any product icon and select Properties.
The Properties dialog box displays.
2. Select the tab to which you want to add a property, if necessary.
3. Click Add.
The Add Property dialog box displays.
4. Enter a label and description for the property.
The label must be unique and can be up to 30 characters.
The description can be up to 126 characters.
5. Select Fabric, Port, or Property from the Type list, if available.
6. Click OK.
The new property displays in the properties list as well as the Product List. To edit the
user-defined property field, click in the field and make your changes.
Editing a property field
NOTE
Properties customization requires read and write permissions to the Properties - Add / Delete
Columns privilege.
You can edit any property that you create on the Properties dialog box.
Fields containing a green triangle ( ) in the lower right corner are editable. To edit a field with a
green triangle ( ), click in the field and make your changes.
To edit a user-defined property, complete the following steps.
1. Right-click any product icon and select Properties.
The Properties dialog box displays.
2. Select the tab on which you want to edit a property, if necessary.
3. Click Edit > Property_Label.
The Edit Property dialog box displays.
4. Change the label and description for the property, as needed.
The label must be unique and can be up to 30 characters.
The description can be up to 126 characters.
5. Select Fabric, Port, or Property from the Type list, if available.
6. Click OK.