Ip custom performance reports, Creating a custom report, Creating a custom report 6 – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1583: Ip custom performance reports 6
1536
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
IP Custom performance reports
43
IP Custom performance reports
You can create customized reports and run or schedule them in the same manner as a standard
report.
You can modify, copy, or delete customized reports. Select the report from the Report Definitions
tab, then click the Edit, Duplicate, or Delete button.
Creating a custom report
Complete the following steps to create a report.
1. Select Monitor > Performance > Custom Reports.
The Performance Custom Reports dialog box displays, as shown in
Figure 669
on page 1536.
FIGURE 669
Performance Custom Reports dialog box
2. Perform one of the following steps:
•
Click Add to add a new report.
•
Select an existing report from the Performance Custom Reports dialog box and click Edit
to edit the report.
•
Select an existing report from the Performance Custom Reports dialog box and click
Duplicate to duplicate the report.
•
Select an existing report from the Performance Custom Reports dialog box and click
Delete to delete the report.
If you select Add, Edit, or Duplicate, the Add/Edit/Duplicate Report Definition dialog box
displays, as shown in
Figure 670
on page 1537. If you are editing or duplicating an existing
report, fields are already populated. Simply make changes as required.