Top port sync losses monitor – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 385
320
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Performance monitors
8
Top Port Sync Losses monitor
The Top Port Sync Losses monitor (
) displays the top ports with synchronization failures
in a table.
FIGURE 121
Top Port Sync Losses monitor
The Top Port Sync Losses monitor includes the following data:
•
Severity icon/monitor title — The color of the worst severity of the data shown next to the
monitor title.
•
Port — The port affected by this monitor.
•
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
•
Sync Losses — The number of synchronization failures for the port.
•
Sync Losses/sec — The number of synchronization failures for the port per second.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Online).
•
Status — The port status (for example, In_Sync, No_Sync).
•
Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to