Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 881)

Brocade Network Advisor SAN + IP User Manual 825
53-1002949-01
Security configuration deployment
22
Configuring a monthly deployment schedule
To configure a monthly schedule, complete the following steps.
1. Select Monthly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Month list (1 through 31).
To configure security configuration schedule, refer to step 11 of “Scheduling a security
configuration deployment” on page 822.