Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 355)

290 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Status widgets
8
Customizing the IP Inventory widget
You can customize the IP Inventory widget to display product inventory for a specific grouping. The
group type and number of products in the group displays to the left of the associated bar; for
example, v04.1.00a [3], where v04.1.00a is the firmware number and [3] is the number of
products running that firmware level.
• Change the grouping by selecting one of the following from the Group By list:
- Firmware — Displays the product inventory by firmware release.
- Model — Displays the product inventory by model.
- Product Type — Displays the product inventory by product type.
- Location — Displays the product inventory by physical location.
- Contact — Displays the product inventory by contact name.
• Zoom in on an area of the widget by dragging the mouse (upper left corner to lower right
corner) to select one or more bars.
NOTE
If the ratio between the longest and shortest bar reaches 5000:1, you should maximize the
widget prior to using zoom.
To return the widget to its original state, reverse the selection (drag from lower right corner to
upper left corner).
Accessing additional data from the IP Inventory widget
Double-click a section of the bar in the IP Inventory widget to navigate to the IP Products - Status
dialog box (where Status is the status of the section you selected). For more information, refer to
“Viewing additional IP product data” on page 292
NOTE
It takes a few moments to populate newly discovered products in the IP Products - Status dialog box
(where Status is the section of the widget you selected).