Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2015)

Brocade Network Advisor SAN + IP User Manual 1975
53-1002949-01
Viewing VC module properties
E
Viewing VC module properties
To view Virtual Connect (VC) module properties, complete the following steps.
1. Right-click a VC module and select Properties.
2. Review the properties for the device.
TABLE 218 Properties tab
Field Description
Fabric The name of the fabric.
Name (Fabric OS modules only) The name of the device.
WwnName The world wide name of the device.
IP Address (Fabric OS modules only) The IP address of the device.
Status The operational status.
Type The device type - Virtual Connect.
Port Count The number of ports.
Product Name The product name.
Serial # The hardware serial number.
VC Firmware The downloaded firmware version of the VC Ethernet management module and all VC FC modules
managed by the VC Domain.
VC Domain Name The domain name.
VC Domain Group The domain group.
IO Bay
Discovery Status The discovery status of the VCEM server of this module.
Last Discovery The last time data collection was performed for this VC module on the VCEM server.
TABLE 219 Port tab
Field Description
Fabric The name of the fabric.
Switch The name of the VC module.
Port # The port number.
Type The port type.
Status The status of the port. For example, LOGGED-IN or NOT-LOGGED-IN.
Port Speed (Gb/s) The speed of the port in gigabits per second.
Port WWN The world wide name of the port.
Physical/Logical Whether the port is Physical or Logical.
NPIV Enabled Whether the port is NPIV enabled or not.
Connected Switch The name of the switch connected to the port.