Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2062)

2024 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Master Log and Switch Console troubleshooting
H
Master Log and Switch Console troubleshooting
The following section states a possible issue and the recommended solution for switch console
errors.
Names troubleshooting
The following section states a possible issue and the recommended solution for names errors.
Problem Resolution
Too many login and log messages received on
switch console and and Master Log due to lazy
polling. NOTE: This setting cannot be disabled for DCB switches.
To disable lazy polling, complete the following steps.
1
Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2 Click the Global Settings tab.
3 Click the Preferences tab.
4 Clear the Enable lazy polling check box.
5 Click Apply to save your work.
6 Click Close to close the Discover Setup - IP dialog box.
7 Click Yes on the confirmation message.
Problem Resolution
Duplicate name error. If you configured the Management application to only allow unique names and you try to
use a name that already exists in the fabric. You can enter a different name for the device
or search for the duplicate name using one of the following procedures:
•
“Searching for a device by name” on page 189 in the Configure Names dialog box
•
“Searching for a device by WWN” on page 190 in the Configure Names dialog box
• “Searching for a device” on page 393