Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 500)

Brocade Network Advisor SAN + IP User Manual 435
53-1002949-01
Port actions
9
5. Select Display Attached Port Properties from the Port Actions list.
6. Click OK to close the dialog box.
The VCS_Name Properties dialog box displays with the attached ports highlighted in the Ports
tab.
Accessing performance monitoring
To access performance monitoring dialog boxes, complete the following steps.
1. Select one of the following view types from the view list on the Product List toolbar.
• Network Object
• IP Topology
• L2 Topology
• Ethernet Fabrics
• VLAN Topology
2. Right-click the device in the Product List and select Properties.
The Device_Name Properties dialog box displays.
3. Click the Port tab.
4. Select one of the following from the Performance list.
• Real Time Graph/Table
• Historical Graph/Table
The Real Time Graph/Table or Historical Graph/Table dialog box displays.
To configure and generate real time performance, refer to “IP real-time performance
monitoring” on page 1505.
To configure and generate historical performance, refer to “IP historical performance
monitoring” on page 1517.
5. Click OK to close the Device_Name Properties dialog box.