Selecting source address products and ports – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual

Page 1778

Advertising
background image

1736

Brocade Network Advisor SAN + IP User Manual

53-1002949-01

Event action definitions

48

4. For each varbind in the Selected Varbinds list, select one of the following operations for the

condition you want to filter:

-

= – Equal to

-

!= – Not equal

-

< – Less than

-

> – Greater than

-

>= – Greater than or equal to

-

<= – Less than or equal to

-

In – Matches collection

-

Not_in – Does not match collection

-

~ – Arbitrary Unicode regular expression

5. Enter the value of the varbind. The value you enter must conform to the data type required by

the varbind. For example, if the varbind expects an integer and you enter a text string, your
entry will be rejected. Alternatively, you can select values from drop-down lists, shown in

Figure 748

.

6. Click Next.

The Sources pane of the Add Event Action dialog box displays. Proceed to

“Selecting source

address products and ports”

.

Selecting source address products and ports

The Sources pane of the Add Event Action dialog box, shown in

Figure 749

, allows you to enter the

IP address, the world wide name, or the name of the source to use as event senders. Alternatively,
you can select source address products to use as event senders from the available list of sources.
You can select from the available list of SAN products, IP products, or hosts by selecting the
appropriate tab.

FIGURE 749

Sources pane of the Add Event Action dialog box

Advertising