Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 327)

262 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Authentication Server Groups on the Management server
7
Defining user accounts on the external LDAP server
If you configure the external LDAP server as the primary authentication server in the server
management console, you must define roles and AORs in the external LDAP server to match the
Management application roles and AORs.
Configuring roles and AORs on the external LDAP server
Open the Management console on the Active Directory installed server and complete the following
steps.
1. Select Start > Run.
2. Type mmc and press Enter.
3. Select File > Add/Remove Snap-in.
4. Click Add.
5. Select Active Directory Schema from the Available standalone snap-ins list and click Add.
6. Click Close.
7. Right-click the Attributes folder (Console Root/Active Directory Schema/ Attributes) and select
New > Attribute.
8. Create the NmAors attribute by completing the following steps.
a. Enter NmAors in the Common Name field.
b. Enter NmAors in the LDAP Display Name field.
c. Enter a unique object identifier in the Unique x500 Object ID field.
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
9. Right-click the Attributes folder (Console Root/Active Directory Schema/ Attributes) and select
New > Attribute.
10. Create the NmRoles attribute by completing the following steps.
a. Enter NmRoles in the Common Name field.
b. Enter NmRoles in the LDAP Display Name field.
c. Enter a unique object identifier in the Unique x500 Object ID field.
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
11. Close the Management console.