Fcs policy and seed switches, Backbone chassis discovery requirements – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 116
Brocade Network Advisor SAN + IP User Manual
49
53-1002949-01
SAN discovery overview
4
FCS policy and seed switches
The Management application requires that the seed switch is the primary Fabric Configuration
Server (FCS) switch at the time of discovery.
Setting time on the fabric will set the time on the primary FCS switch, which will then distribute the
changes to other switches.
When FCS Policy is defined, ConfigDownload is allowed only from the primary FCS switch, but
Management application does not check at the time of download that the switch is the primary FCS
Switch.
NOTE
Switches running in Access Gateway mode cannot be used as the seed switch.
NOTE
The Backbone Chassis cannot be used as seed switch to discover and manage edge fabrics. You
must discover a seed switch from each edge fabric to discover and manage the edge fabric.
NOTE
The Backbone Chassis can only discover and manage the backbone fabric.
Backbone Chassis discovery requirements
details which Backbone Chassis models can be discovered by each version of the
Management application and whether or not the model can be discovered as a seed switch or only
as a member switch.
TABLE 19
Backbone Chassis discovery
Device
Professional
Professional Plus
Enterprise
8-slot Backbone Chassis as
seed switch
No
No
Yes
8-slot Backbone Chassis as
member switch
Yes for discovery;
however, it cannot be
managed.
Yes for discovery;
however, it cannot be
managed.
Yes
4-slot Backbone Chassis as
seed switch
Yes
Yes
Yes
4-slot Backbone Chassis as
member switch
Yes
Yes
Yes
16 Gbps 8-slot Backbone
Chassis as seed switch
No
No
Yes
16 Gbps 8-slot Backbone
Chassis as member switch
Yes for discovery;
however, it cannot be
managed.
Yes for discovery;
however, it cannot be
managed.
Yes
16 Gbps 4-slot Backbone
Chassis as seed switch
Yes
Yes
Yes
16 Gbps 4-slot Backbone
Chassis as member switch
Yes
Yes
Yes