Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 634)

572 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Port commissioning overview
14
Testing CIMOM server credentials
You should validate the CIMOM server credentials before you decommission or recommission
ports. During the decommission or recommission of an F-Port, the Management application
validates the CIMOM server credentials.
1. Select a device and select Configure > Port Commissioning > Setup.
The Port Commissioning Setup dialog box displays ( Figure 210 ).
2. Select one or more CIMOM servers from the System List table and click Test.
The status of the selected CIMOM server rows display “Testing” in the System List table. When
testing is complete, the CIMOM server connectivity status displays. Valid status options
include:
• OK — CIMOM server contact successful with current credentials.
• Not Contacted Yet — CIMOM servers configured, connectivity not tested yet.
• Credentials Updated — Credentials changed, connectivity not tested yet.
• Credentials Failed — CIMOM server contact failed with current credentials.
• Not Reachable — CIMOM server not reachable.
• Wrong Namespace — CIMOM server namespace is incorrect.
3. Click OK to close the Port Commissioning Setup dialog box.
When the test is complete, an application event displays in the Master Log detailing success or
failure.
Deleting CIMOM server credentials
1. Select Configure > Port Commissioning > Setup.
The Port Commissioning Setup dialog box displays ( Figure 210 ).
2. Select one or more CIMOM server from the System List table and click the left arrow button.
The details for the last selected CIMOM server row displays in the Add/Edit System and
Credentials area.
3. Confirm that this is the CIMOM server you want to delete and click OK or Apply to delete the
CIMOM server from the Port Commissioning Setup dialog box.
When the deletion is complete, an application event displays in the Master Log detailing
success or failure.