Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2003)

Brocade Network Advisor SAN + IP User Manual 1963
53-1002949-01
SAN device properties
E
Discovery Status The discovery status of the switch. Examples include ‘Discovered: Seed
Switch’ and ‘Discovered: Not Reachable’.
Domain ID The device’s domain ID, which is the top-level addressing hierarchy of
the domain.
Fabric The fabric name.
Fabric Name The name specified through the device Element Manager.
Fabric Watch Whether Fabric Watch is up or down.
Factory Serial Number The factory serial number.
Fastwrite Whether fastwrite is On or Off for the FCIP tunnel.
FC Port The FC port of the FCIP tunnel.
FCoE Capable Whether the device is Fibre Channel over Ethernet capable.
FCS Role Whether FCS is supported.
Firmware The firmware version.
GigE Port The GigE port of the FCIP tunnel.
Host Name The Host name.
IKE Policy # The IKE policy number. Also includes the following information:
•
Authentication Algorithm
•
Encryption Algorithm
•
Diffie-Hellman
•
SA Life
IP Address The device’s IP address.
IPSec Policy # The IPSec policy number. Also includes the following information:
•
Authentication Algorithm
•
Encryption Algorithm
•
SA Life
L2 Capable Whether the device is Layer 2 capable.
L3 Capable Whether the device is Layer 3 capable.
L2 Mode The Layer 2 mode. Options include Access, Converged, or Trunk.
LAG ID The link aggregation group identifier.
Last Discovery The date and time of the last discovery.
Location The customer site location.
MAC address In a network, the Media Access Control (MAC) address is a unique
number that identifies a specific hardware interface. It is a 12-digit
hexadecimal number.
Managed By The management program used to manage the fabric.
Master Port The master port of the trunk.
Member Ports The member ports of the trunk.
Model The model number of the device.
Name The user-defined name of the switch.
TABLE 216 Device properties (Continued)
Field/Component Description