Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1450)

1402 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
GSLB Manager
39
Viewing the GSLB Manager
To view the GSLB Manager, perform the following steps.
Select Configure > Application Delivery > GSLB.
The Policy Configuration tab in the GSLB dialog box, shown in Figure 613 , displays.
FIGURE 613 GSLB dialog box - Policy Configuration tab
The GSLB dialog box displays the following buttons:
• Add — Creates a new GSLB policy, site, or zone definition and a new controller configuration.
• Edit — Modifies existing GSLB Manager definitions and configurations.
• Duplicate — Creates a new definition or configuration by copying an existing one.
• Delete — Deletes a definition or configuration from GSLB Manager.
The GSLB dialog box contains the following tabs:
• Policy Configuration — GSLB policies are managed from this tab.
• Site Configuration — GSLB sites are managed from this tab.
• Zone Configuration — GSLB zones are managed from this tab.
• Controller Configuration — GSLB payloads are managed from this tab. GSLB payloads contain
GSLB policies, sites, and zones and are deployed to GSLB controllers. Once deployed on the
controller, DNS responses to GSLB zones are modified, based on the policies and site
definitions.