Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 138)

Brocade Network Advisor SAN + IP User Manual 71
53-1002949-01
IP discovery overview
4
MIB support
IP discovery requires SNMP management information base (MIB) support on the device for
management information collection. For a list of required MIBs, refer to
Table 23 on page 71 or
Table 24 on page 73.
TABLE 23 Required MIB support for IronWare OS devices
IETF standard MIB name Required MIB object Data collected
N/A Brocade MIB
IEEE 802.1AB LLDP-MIB lldpObjects.lldpRemoteSystemsData For Layer 2 topology information:
Entire lldpObjects.lldpRemoteSystemsData
RFC 1213 MIB-II mib-2.system
mib-2.interfaces.ifTable
mib-2.ip.ipAddrTable From mib-2.interfaces.ifTable for interface
level information:
•
ifName/ifDescr
•
ifAlias
•
ifType
•
ifMtu
•
ifSpeed
•
ifPhysAddress
•
ifAdminStatus
•
ifOperStatus
•
ifLastChange
From mib-2.ip.ipAddrTable for IP subnet
information:
•
ipAdEntAddr
•
ipAdEntNetMask
From mib-2.ip.ipAddrTable for Layer 3
topology information:
•
ipForwarding
RFC 2465 IPv6-MIB ipv6MIBObjects
ipv6NetToMediaTable
ipv6MIBObjects.ipv6AddrTable From ipv6MIBObjects and
ipv6NetToMediaTable for interface level
information:
•
ifName/ifDescr
•
ifAlias
•
ifType
•
ifMtu
•
ifSpeed
•
ifPhysAddress
•
ifAdminStatus
•
ifOperStatus
•
ifLastChange
From ipv6MIBObjects.ipv6AddrTable for IP
subnet information:
•
ipv6AddrAddress
•
ipv6AddrPfxLength