View management, Wireless device properties, Element manager – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 667
608
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
View management
17
View management
Wireless controllers and standalone access points display in the Network Objects, L2 Topology, IP
Topology, and VLAN Topology views.
NOTE
Wireless access points in adaptive mode do not display in the topology.
Instructions for managing customized views of the topology are detailed in
and include information about the following:
•
•
•
•
•
Wireless device properties
NOTE
Wireless access points in adaptive mode do not display in the Management application.
The Management application enables you to view properties for individual devices as well as device
group properties.
Instructions for viewing wireless device properties are detailed in the following sections:
•
“Viewing product group properties”
•
“Viewing IP device and port properties”
Element Manager
NOTE
Wireless access points in adaptive mode do not display in the Management application.
The Management application enables you to perform additional configuration of the wireless
devices using an Element Manager (web-based graphical user interface (GUI)) or command line
interface (CLI).
The Element Manager (Brocade Mobility) is a software management application that allows full
control of all managed features for the wireless devices in your IP network. For more information
about the Element Manager, refer to the Brocade Mobility RFS4000, RFS6000, and RFS7000
System Reference Guide available at
The CLI also enables you to configure, monitor, and troubleshoot wireless controllers. For more
information about the command line interface and a list of available commands, refer to the
Brocade Mobility RFS4000, RFS6000, and RFS7000 CLI Reference Guide available at