Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 438)

Brocade Network Advisor SAN + IP User Manual 373
53-1002949-01
IP tab overview
9
7. Reset zoom list — Use to reset the zoom (Actual Size, Fit Content, 25%, 50%, 75%, 100%,
125%, 150%, 200%, or 500%) of the Topology Map.
8. Zoom In icon — Use to zoom in on the Topology Map.
Host topology map toolbar
The Host Topology map toolbar is located at the top right side of the View window and provides
tools to export the topology, to zoom in and out of the Topology Map, collapse and expand groups,
and fit the topology to the window. Not enabled until you discover a host.
FIGURE 148 Host Topology Map toolbar
1. Export — Use to export the topology to a PNG file.
2. Zoom In — Use to zoom in on the Connectivity Map.
3. Zoom Out — Use to zoom out on the Connectivity Map.
4. Fit in View — Use to scale the map to fit within the Connectivity Map area.
5. Expand — Use to expand the map to show all ports in use on a device.
6. Collapse — Use to collapse the map to show only devices (hides ports).
IP Product List
Lists the devices discovered in the Management application.
The Product List, located on the IP tab, displays an inventory of all discovered devices and ports.
The Product List is a quick way to look up product and port information, including serial numbers
and IP addresses.
To display the Product List, select View > Show Panels > Product List or press F9.
You can edit information in the Product List by double-clicking in a field marked with a green
triangle. You can sort the Product List by clicking a column heading.
The following columns (presented here in default order) are included in the Product List.
• Group/Product — The icon and name of the product or product group. Also, the status of the
product or product group.
For VDX/VCS products, the status is computed from the operational status and reachability
status.
• Name — Displays the name of the product.
• IP Address — Displays the IP address (IPv4 or IPv6 format) of the product.
• Product Type — Displays the type of product, such as Router or L2 Switch.
• Serial # — Displays the serial number of the product.
5 6 1 2 3 4