Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 221)

154 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Product group overview
5
Creating a dynamic product group
To create a dynamic product group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Select Add Product Group > Dynamic from the Grouping list on the Product List toolbar.
The Add Product Group - Dynamic dialog box displays.
FIGURE 59 Add Product Group - Dynamic dialog box
3. Enter a unique name for the product group in the Name field.
4. Enter a description for the product group in the Description field.
5. Select the Topology Display Enable check box to display the product group in the L2 Topology
view.
6. Click Insert.
A new row displays in the Group Criteria table.
7. Select one of the following from the Property list.
• Name
• IP Address
• Product Type
• Serial #
• Status
• Vendor
• Model
NOTE
You can add a standalone VDX product or a VCS fabric to a user-defined Product Group;
however, the VCS fabric members are not included with the group.
• Firmware