Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1455)

Brocade Network Advisor SAN + IP User Manual 1407
53-1002949-01
GSLB policy management
39
Adding a prefix on the Prefix tab
1. Click the Prefix tab on the Policy Configuration dialog box, shown in Figure 615 .
2. Click Add.
A new row is added to the Geo Prefix/Static Prefix list.
FIGURE 615 Policy Configuration dialog box - Prefix tab
3. Enter the IP address and select a location from the Location list.
If you select NONE for the location, the prefix is considered static. If you select any other
location, the prefix is considered geographical (Geo). Static prefixes never age out, but
geographical prefixes are dynamic and can age out.
Deleting a prefix from the Prefix list
1. Click the Prefix tab on the Policy Configuration dialog box.
2. Select a row in the Geo Prefix/Static Prefix list.
3. Click Delete.