Filtering port details – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1676
1632
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Data monitoring
46
4. Review the details in the Port Data list:
•
Product filter — The name of the Product.
•
Port filter — The port identifier.
•
Name filter — The port name.
•
Status filter — The Ethernet status of the port. Values include: Up and Down.
•
State filter — The Ethernet state of the port. Values include: Enabled and Disabled.
•
Admin State filter — The PoE administrative state of the port. Values include: On (enabled)
and Off (disabled).
•
Oper. State filter — The PoE operational state of a port. Values include: On (connected to a
powered device) and Off (not connected to a powered device).
The administrative state must be On for operational state to be On.
•
Allocation (W) filter — The amount of allocated power to the port in Watts.
•
Consumption (W) filter — The power consumed by the device connected to the port in
Watts.
•
Consumption % filter — The power consumed as a percentage of allocated power.
•
Type filter — The type of the device connected to the port. Values include: 802.3af and
802.3at.
•
Class filter — The class of the device connected to the port. Values include: Class 0
through Class 4.
•
Priority filter — The priority of the device connected to the port. Values include: invalid,
critical, high, low, medium, and other.
•
Mfr. filter — The manufacturer of the device connected to the port. This information is
obtained using LLDP neighbor details command.
•
Model filter — The model of the device connected to the port. This information is obtained
using LLDP neighbor details command.
•
Software filter — The software version on the attached device.
5. Click Close to close the Power Center dialog box.
Filtering port details
To filter port details, complete the following steps.
1. Select Monitor > Power Center.
The Power Center dialog box displays.
2. Select PoE Products from the View list.
3. Select a product in the Product list.
The port data for the selected product displays in the Port Data list.