Saving switch configurations on demand – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 590
528
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Configuration repository management
14
Saving switch configurations on demand
NOTE
Save switch configuration is only supported on Fabric OS switches.
NOTE
This feature requires a Trial or Licensed version.
NOTE
To save switch configuration on more than one switch at a time, you must have the Enhanced Group
Management license.
NOTE
The Management application enables you to save the same switch configuration to the repository
using two methods: on demand (Configure > Configuration > Save) or by defining a schedule
(Configuration > Schedule Backup).
Configuration files are uploaded from the selected switches and stored in individual files. Files are
named with the convention cfg_fabricName_switchName_domainID.
Use this procedure to immediately save switch configurations to the repository. To create a
scheduled back up of switch configurations to the repository, refer to
1. Select Configure > Configuration > Save Now.
The Save Switch Configurations dialog box displays.
FIGURE 196
Save switch configurations
2. Select the switches for which you want to save configuration files from the Available Switches
table.
3. Click the right arrow to move the selected switches to the Selected Switches table.