Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 475)

410 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Grouping on the topology
9
Expanding groups
To expand a group on the topology, do one of the following:
• Double-click the group icon.
• Right-click the group icon and select Expand from the shortcut menu.
To expand all groups on the topology by one level, click the Expand button on the Connectivity Map
toolbar (
).
Viewing connections
You can view the connections in a fabric using one of the following methods:
• Select a fabric and then select View > Connected End Devices and select Include Virtual
Devices, Hide All, Show All, or Custom.
• Right-click the fabric and select Connected End Devices > Include Virtual Devices, Hide All,
Show All, or Custom from the shortcut menu.
NOTE
Selecting Hide All disables the Include Virtual Devices option.
Configuring custom connections
NOTE
Active zones must be available on the fabric.
To create a display of the connected end devices participating in a single zone or group of zones,
complete the following steps.
1. Select a fabric on the topology and select View > Connected End Devices > Custom.
The Connected End Devices - Custom display for Fabric dialog box displays with a list of devices
participating in a single zone or a group of zones in the Zones in Fabric list.
2. Select the zones you want to include in the connection in the Zones in Fabric list.
3. Select the application to which you want to add the selected zones in the Application list.
4. Click the right arrow button to move the zones to the Selected Zones list.
5. Click Save.
The Save Application dialog box displays.
6. Enter a new name in the Application Name field.
7. Click OK on the Save Application dialog box.
8. Click OK on the Connected End Devices - Custom display for Fabric dialog box.
The saved custom connection configuration displays in the Connected End Devices menu.