Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1867)

1826 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
MAPS groups
50
5. Remove objects from the group by selecting the object (port, SFP, or circuit) in the Selected
Ports/Circuits list and clicking the left arrow button.
The selected objects move from the Selected Ports/Circuits list to the Available Ports/Circuits
list.
6. Repeat step 2 through step 5 for each group you want to edit.
7. Click OK on the Fabric/Device _Name - Manage MAPS Groups dialog box.
8. Click Close on the MAPS Configuration dialog box.
Deleting a group
You can delete a group from the fabric or device.
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
Configure.
The MAPS Configuration dialog box displays.
2. Select a fabric or device in the SAN/Fabric/Switch list and click Manage.
The Fabric/Device _Name - Manage MAPS Groups dialog box displays with a list of all
configured Port, SFP, or FCIP groups on the selected fabric or device in the Groups area.
3. Select the group you want to delete in the Groups list.
A confirmation message displays.
4. Click Yes on the confirmation message.
The selected group is deleted from Groups list.
5. Repeat step 3 and step 4 for each group you want to delete.
6. Click OK on the Fabric/Device _Name - Manage MAPS Groups dialog box.
7. Click Close on the MAPS Configuration dialog box.