Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 155)

88 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
IP SNMP credentials
4
Reordering SNMP credentials in the list
Discovery probes the network for devices, according to the order in the list of SNMPv3 read-write
credentials or SNMPv1 or SNMPv2c read-write community strings. Discovery uses the first item to
find devices that are associated with those credentials or community strings, then continues down
the list. Therefore, place the most commonly used credentials or community strings first.
To rearrange the SNMPv3 read-write credentials or SNMPv1 or SNMPv2c read-write community
strings lists, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Global Settings tab.
3. Click the SNMP tab.
4. Select an entry in the Selected SNMPv3 Read-Write Credentials or Selected Read-Write
Community Strings list and use the Up and Down buttons to rearrange the entries.
5. Click Apply to save your work.
6. Click Close to close the Discover Setup - IP dialog box.
7. Click Yes on the confirmation message.
Deleting SNMP credentials from the list
To delete an entry from the SNMPv3 read-write credentials or SNMPv1 or SNMPv2c read-write
community strings lists, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Global Settings tab.
3. Click the SNMP tab.
4. Choose one of the following options:
• Select the SNMPv3 read-write credentials you want to delete in the Selected SNMPv3
Read-Write Credentials list and click the left arrow button.
• Select the SNMPv1 or SNMPv2c read-write community string you want to delete in the
Selected Read-Write Community Strings list and click the left arrow button.
5. Click Apply to save your work.
6. Click Close to close the Discover Setup - IP dialog box.
7. Click Yes on the confirmation message.