Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 682)

624 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
VCS product groups
18
VCS product groups
The standalone Network OS switches and the VCS fabric are treated as a single Layer 2 (L2) switch
for both static and dynamic product groups. The product group membership cannot contain fabric
members. The standalone Network OS VDX switches are shown in
Table 79 .
Static product group
The standalone VDX switch and the VCS fabric can be added as a static product group member.
The fabric members, however, are not included in the available product panel.
Dynamic product group
The standalone VDX switch and the VCS fabric are included when the dynamic product group is
defined. The criteria search and filter the fabrics based on user-defined search criteria. The search
criteria do not consider fabric members.
TABLE 79 Network OS-supported hardware
Device name Firmware level required
Network OS VDX 2730 10 Gbps connection blade v2.1.1_fuj
Network OS VDX 2740 switch nos4.0.0_bbd
Network OS VDX 6710 switch 2.1 or later
Network OS VDX 6720-24 switch 2.1 or later
Network OS VDX 6720-60 switch 2.1 or later
Network OS VDX 6730-32 switch 2.1 or later
Network OS VDX 6730-76 switch 2.1 or later
Network OS VDX 8770-4 switch 3.0 or later
Network OS VDX 8770-8 switch 3.0 or later
Network OS VDX 6740 switch 4.0 or later
Network OS VDX 6740T switch 4.0 or later