Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 2149
2112
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Database tables and fields
I
MTU
Maximum transmission unit in bytes of the FCoE port.
Default - 2112, 0 - auto
int
PATH_TOV
The value between 0 and 60 that specifies the
time-out session.
NOTE: You can only enable or edit the path time out
when MPIO is disabled
int
SCSI_QUEUE_DEPTH
The LUN queue depth feature determines how many
concurrent IOs the adapter will accept and process
per LUN (not at the adapter port level, as with the IO
throttle value). Not setting the queue depth to the
optimal level can result in poor performance, where
outstanding IO queuing can cause bottlenecks. For
optimum performance, consider both the
configuration settings of the HBA and the physical
limits on the storage array. If you set the queue depth
too low on the HBA it could lead to under-utilization of
storage resources.
NOTE: The Queue Depth feature is supported for all
adapter classes configured in FC or FCoE
mode (Windows operating systems only)'
int
STATE
The state of the FCoE port (online or offline).
varchar
64
SUPPORTED_CLASS
The classes supported on the FCoE port.
For example, Class2 and Class3.
varchar
256
TRL_SPEED
TRL (Target Rate limit) speed. This will be less than
max speed supported by this port.
int
TRL_STATE
TRL (Target Rate limit) state of the port. Possible
values are 0 - disable , 1 - Enable
smallint
PG_ID
The priority group ID. Possible values are 0-7
(user-definable) and 15.0-15.7 (strict priority).
varchar
32
PRIORITIES
'Lists the available priorities (High, Medium, Low).
varchar
128
FCOE_MAC
FCOE MAC address of the port.
varchar
64
IOC_ID
The IO controller Identifier.
int
TABLE 233
HBA_REMOTE_PORT
Field
Definition
Format
Size
ID Autogenerate
primary
column.
int
SYMBOLIC_NAME
The symbolic name associated with the remote port.
varchar
256
PORT_WWN
The world wide name of the remote device''s port.
char
23
NODE_WWN
The world wide name of the remote device
char
23
NAME
The name associated with the device
varchar
256
FC_ADDRESS
FC Address for the port in hex
varchar
6
FRAME_DATA_SIZE
The frame size, in bytes, of the device.
The default value is 512.
int
SPEED
Operating speed of the remote port.
int
TABLE 232
HBA_PORT_FCOE_DETAILS (Continued)
Field
Definition
Format
Size