Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1283)

1232 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Change tracking
32
Change tracking
Use the change tracking feature to compare the latest backup configuration file with the
configuration that is designated as the baseline.
1. Click the IP tab.
2. Select Configure > Configuration > Configuration Repository.
3. Click the Change Tracking tab.
The Change Tracking tab of the Configuration Repository dialog box displays, as shown in
Figure 528 .
FIGURE 528 Configuration Repository dialog box - Change Tracking tab
The Configuration Change Tracking list displays the following information:
• Name — The product name and IP address
• Baseline Time — The date and time when the baseline configuration for the device was
copied into the repository of the management server
• Backup Time — The time when the last backup attempt occurred for the selected device
• Change Status — The change status of the latest device backup
• Backup Type — How the backup was obtained. Backup options include the following types:
 Discovery — Obtained after the discovery process
 Pre-deployment — Occurs before a configuration change is deployed to the device
 Post-deployment — Occurs after a configuration change is deployed to the device
 Running Config Change Trap — Occurs when a running configuration is changed
 Startup Config Change Trap — Occurs when a startup configuration is changed