Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1976)

1936 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
About user privileges
D
TABLE 209 Application privileges and behavior
Privilege Description No Privilege Read-Only Read/Write
Active Session
Management Allows you view active
client sessions and
disconnect an unwanted
user. Disables the Active
Sessions command from
the Server menu. Enables the Active
Sessions command from
the Server menu.
Disables all commands
and functions on the
dialog box except the
Close and Help. Enables the Active
Sessions command from
the Server menu.
Enables all commands
and functions on the
dialog box.
Call Home Allows you to configure
call home centers,
devices, and event filters. Disables the Call Home
command on the Monitor
> Event Notification
menu. Enables the Call Home
command on the Monitor
> Event Notification
menu. Enables the Add,
Edit, Remove, Edit
Centers, and Show/Hide
Centers buttons as well
as the Enabled check
boxes on the dialog box;
however, disables the OK
and Apply buttons on the
Call Home, Call Home
Event Filter, and
Configure Call Home
Center dialog box boxes. Enables the Call Home
command on the Monitor
> Event Notification
menu. Enables all
functions in the dialog
box.
Certificate Management Allows you to access the
Certificate Management
dialog box and manage
server truststores. Disables Certificates on
the Options dialog box. Enables Certificates on
the Options dialog box.
Only viewing of the
certificates is supported. Enables Certificates on
the Options dialog box.
Enables all functions in
the dialog box.
Configuration
Management Allows you to access the
Configuration
Management dialog box
and perform
configuration upload and
replication. Disables Save, Restore,
Configuration Repository,
and Schedule Backup
under Configure > Switch
and the Configuration
command under
Configure > Switch >
Replicate. Enables Configuration
Repository under
Configure > Switch.
Only viewing of saved
configuration is
supported.
Configuration upload and
replication are disabled. Enables all commands
under Configure > Switch.
Allows you to perform
configuration upload,
download and restore.
DCB Management Allows you to configure
DCB devices. Disables the DCB
command from the
Configure menu. Enables the DCB
command from the
Configure menu.
Disables all commands
and functions on the
dialog box except the
Close and Help. Enables the DCB
command from the
Configure menu.
Enables all commands
and functions on the
dialog box.
Element Manager Allows you to access the
device element manager. Disables the Element
Manager command. Enables the Element
Manager command.
Allows you to open the
Element Manager;
however, disables all
functions. Enables the Element
Manager command.
Allows you to perform all
Element Manager
functions.