Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 593)

Brocade Network Advisor SAN + IP User Manual 531
53-1002949-01
Configuration repository management
14
FIGURE 198 Schedule backup of switch configurations
2. Click the Enable scheduled backup check box.
3. Set the Schedule parameters. These include the following:
- The desired Frequency for backup operations (daily, weekly, monthly).
- The Day you want back up to run.
If Frequency is Daily, the Day list is grayed out.
If Frequency is Weekly, choices are days of the week (Sunday through Saturday).
If Frequency is Monthly, choices are days of the month (1 through 31).
- The Time (hour, minute) you want back up to run.
- The maximum age allowed before you Purge Backups.
The number of purge days (7 through 90) should be at least one day more than the
selected backup frequency.
The backup purge thread runs every day at 12:30 PM and deletes all back up
configurations that exceed the maximum age allowed.
4. Choose one of the following options to determine the scope of the backup.
• Select the Backup all fabrics check box, if necessary, to back up all switch configurations
of discovered switches in all fabrics
• Clear the Backup all fabrics check box and select the specific fabric Backup check boxes
in the Selected Fabrics table to back up individual fabrics.
The Selected Fabrics table includes the following information: