Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1896)

Brocade Network Advisor SAN + IP User Manual 1855
53-1002949-01
Deleting SAN reports
52
NOTE
Hyperlinks in reports are active only if the source data is available.
3. Click Show in Browser.
The selected report displays in your default web browser.
4. Select File > Print (in the web browser).
The Print dialog box displays.
5. Select the printer to which you want to print and click Print.
6. Close the web browser.
7. Click Close in the View Reports dialog box.
8. Click Yes on the “are you sure you want to close” message.
Deleting SAN reports
To delete reports, complete the following steps.
1. Select Reports > View or click the View Report icon.
The View Reports dialog box displays.
2. Select the report you want to delete in the All Reports list.
You can select reports by Time, Report Type, or User.
3. Click Delete Report.
ATTENTION
Once you click Delete Report, the report is deleted without confirmation.
4. Click Close to close the View Reports dialog box.
5. Click Yes on the “are you sure you want to close” message.
Generating SAN performance reports
NOTE
Performance reports require a SAN Trial or Licensed version.
To generate a historical performance report for a device, complete the following steps.
1. Select the device for which you want to generate a performance report.
2. Choose one of the following options:
• Select Monitor > Performance > Historical Report.
OR
• Right-click the device and select Performance > Historical Report.
The HIstorical Performance Table dialog box displays.