Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 179)

112 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
IP discovery profiles
4
Configuring a weekly discovery schedule
To configure a weekly discovery schedule, complete the following steps.
1. Select Weekly from the Frequency list.
FIGURE 36 Scheduling tab - Weekly
2. Select the time of day you want discovery to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want discovery to run from the Day of the Week list.
4. Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.
5. To finish configuring the discovery schedule, return to “Scheduling discovery” on page 109.
Configuring a monthly discovery schedule
To configure a monthly discovery schedule, complete the following steps.
1. Select Monthly from the Frequency list.
FIGURE 37 Scheduling tab - Monthly
2. Select the time of day you want discovery to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want discovery to run from the Day of the Month list (1 through 31).
4. Click the right arrow button to add the schedule to the Scheduled Discovery Cycles list.
5. To finish configuring the discovery schedule, return to “Scheduling discovery” on page 109.