Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1482)

1434 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Deploying certificates and keys
40
Deploying certificates and keys
NOTE
If the ADX is running software release 12.3.00 or later, you can only view and manage SSL
certificates that are bound to Virtual IP servers that are in your Area of Responsibility (AOR). To add
a Virtual IP server to your AOR, refer to
“Assigning products to an AOR” on page 253
You can deploy an SSL certificate and key to a ServerIron or ADX product using the following
procedure.
1. Select Configure > Application Delivery > SSL Certificates.
The SSL Certificates dialog box displays.
2. Select a certificate from the Certificate View tab.
3. Click Deploy.
The Deploy Certificates/Keys dialog box displays ( Figure 629 ).
FIGURE 629 Deploy Certificates/Keys dialog box
4. Select a product from the Available Targets list.
5. Use the right arrow button to move the selected product to the Selected Targets list.
6. Click OK.
The certificate and key selected from the Certificate View tab are deployed to the selected
products.