Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2025)

Brocade Network Advisor SAN + IP User Manual 1985
53-1002949-01
IP device properties
E
Port Actions list Select one of the following options:
•
Enable
•
Disable
•
Display Attached Port Properties
Performance list Select to launch the Performance dialog box.
Fabric and Edge Ports properties
•
Identifier — The identifier of the port.
•
Name — The name of the port. This is an editable field. Enter a
name (up to 64 characters) for the port.
•
MAC Address — The MAC Address of the port.
•
Port Status — The status of the port.
•
Port State — The state of the port.
•
Type — The port type.
•
Speed — The Speed of the port.
•
L2/Tag Mode — Indicates whether L2 tag mode is enabled or
disabled.
•
Untagged VLAN ID — The untagged VLAN identifier of the port.
•
Duplex Mode — The duplex mode of the port.
•
Role — The role of the port. Possible values include the following
roles:
-
Fabric
-
Edge
-
Stacking
•
Profile Mode — Displays the profile mode status of the port; for
example, Enabled or Disabled.
•
Active Profiles — Displays the active profiles associated with the
port.
•
Attached Device [MACs] — Displays the MAC address of the
attached device. The value is empty when the port is not
connected. The value contains a comma-separated list of MAC
address when more than one MAC address is found.
•
LAG/Trunk ID — Displays the LAG or trunk ID.
Field/Component Description