Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1414)

Brocade Network Advisor SAN + IP User Manual 1365
53-1002949-01
VPLS Manager
37
FIGURE 599 VPLS Manager Saved Configurations tab
3. You can use the Name field to filter output by configuration name.
You can use an Asterisk (*) as a wild card character.
4. Click Get to begin the search.
Configurations that match the filter criteria display under Saved Configurations, showing the
configuration ID, the configuration name, and the name of the user that created the
configuration.
When you select a configuration, configuration information displays in the fields below Saved
Configurations.
• VPLS Settings — Displays the following information about a selected VLL in the fields
below:
 Configuration ID — The VCID of the VPLS.
 Name — The name of the VPLS.
 Status — Current status of the VPLS. This status is derived from the state of all PE
devices for a VPLS.
• PE Products table — Displays the following information:
 PE Devices — Names and IP addresses of the endpoint devices.
 Peers Up — The number of peers that are up.
 Endpoints Up — The number of endpoints that are up.